Hi, Simon here. I hope you're doing well. In this video, I'll guide you through the process of replacing the touch screen on an iPad 8th generation, model A2270. If you need to check your model, turn your iPad over and look for the model number on the back. This guide is also applicable for models A2428 and A2429.
## Safety First
Before starting, make sure to wear safety goggles to protect your eyes from any flying glass shards during the repair. This is crucial as the
broken iphone glass glass can be sharp and dangerous.
## Tools and Materials Needed
1. Heat gun or hair dryer
2. Metal and plastic prying tools
3. Double-sided adhesive tape (2mm and 3mm)
4. Super glue (for the home button bracket)
5. Scissors
6. Phillips screwdriver
7. Tweezers
You can find all these tools and the replacement screen on Amazon or eBay. Links to these items are provided in the video description.
## Step-by-Step Instructions
### 1. Power Off the iPad
Start by turning off the iPad. Press and hold the top power button, then slide to power off.
### 2. Heat the Screen
Use a heat gun or
hair dryer to warm up the edges of the screen. This softens the adhesive holding the glass. Move the heat gun constantly to avoid overheating any one spot, which could damage internal components like the LCD, battery, or logic board.
### 3. Remove the Broken Screen
Once heated, use a metal prying tool to gently lift the glass. Insert a plastic prying tool to keep the glass separated from the adhesive. Be careful around the bottom edge where the home button and Wi-Fi antenna cables are located.
### 4. Detach the Home Button
Carefully lift the home button cable, making sure not to damage it. This cable will be transferred to the new screen. The home button includes the Touch ID sensor, which is essential to keep if you want to retain the Touch ID functionality.
### 5. Cut the Flex Cable
To make the removal easier, cut the flex cable of the broken screen. This allows you to remove the glass and work in a cleaner environment.
### 6. Remove the LCD
Peel off the black tape covering the screws at the corners of the LCD. Use a Phillips screwdriver to remove the four screws. Lift the LCD at a 90-degree angle and remove the three screws securing the LCD bracket. Disconnect the LCD screen cable.
### 7. Clean the Surface
Check for any remaining glass shards or adhesive on the iPad frame. Clean the surface thoroughly to ensure the new screen sits properly.
### 8. Apply Double-Sided Adhesive Tape
Apply 2mm double-sided adhesive tape along the sides of the iPad frame and 3mm tape at the top and bottom. This will secure the new screen in place.
### 9. Install the Home Button
Attach the original home button to the new screen. Use super glue to secure the bracket, ensuring it provides proper support when pressing the button. Adjust the bracket position until the button clicks smoothly.
### 10. Connect the New Screen
Reconnect the digitizer cable and LCD screen cable. These connectors should snap into place without forcing them. Ensure all connections are secure.
### 11. Reattach the LCD
Reinstall the LCD screen by aligning it properly and securing it with the screws and bracket.
### 12. Test the iPad
Power on the iPad to ensure everything works correctly. Test the home button and touch screen functionality before sealing everything back together.
### 13. Seal the New Screen
Peel off the protective film from the adhesive tape and the new screen. Align the new screen with the iPad frame, pressing down gently to secure it in place.
### 14. Final Checks
Press down firmly along the edges of the screen to ensure a good seal. Do a final check of the touch screen and home button to make sure everything functions properly.
### Conclusion
Replacing the touch screen on an iPad 8th generation can be challenging, but with patience and the right tools, its manageable. If you found this guide helpful, please like the video and subscribe to the channel for more repair tutorials. If you have any questions, feel free to comment below. Check the links in the description for tools and replacement parts. Thanks for watching, and take care!
